FlubRC T-18th SR-Comp Series Cab

Compatible with the 18th scale 4M chassis. 

The SR-Comp Series Cab features our pinched cab that can pair with our doved bed to give you our well known Komp Koffin shape. Featuring our new mesh grill and clear lens, translucent red tail lens, seat, and dash with steering wheel. Approach and departure angles have been perfected, and fenders have also been re sized to fit larger tires. Our MagSliderz System has mounting figured out for you, simply bolt on and install the N52 magnets. Interior and grill parts come in black and are easily painted. Takes 3mm LEDs for lighting.

The SR-Comp body is meant for aftermarket chassis and laydown servo mounts. To run this on a stock chassis you will need to relocate electronics, run lower shock towers, and a laydown servo mount.

Cab will come in the color you choose in either our standard or carbon materials. The parts will come in Carbon black, and are easily painted. 

Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved.

MagSliderz mounting system has been completely re-worked. All of our 1/18 body's will use the same MagSliderz, and we now have 5 options:

🟢 0° for stock chassis or any chassis that uses a stock type skid and utilizes a 0° skid angle.

🟢 3.5° Angled Skid - recommended for Meus chassis

🟢 6° JEC EVO18 Specific

🟢 6.5° DBRC Gila 

🟢 6-8° Angled Skid - Leved at 6° this is an additional option if using the full skid angle available on 6-8° chassis.

 These are made to order and will have a wait time of approximately 1 to 2 weeks depending on workload it could take longer.

This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services.