FlubRC T-18th J-Scale Series Tops

 We have 3 top options that finish off your J-series Main Body.

The Full Cage Top is secured with 6 M2 screws and the scale dash gets glued to the lower windshield section. This top is a 2 piece and gets screwed together with 4 top side screws that connect the pieces together.

The Half Top is secured with 4 M2 screws. The scale dash gets glued to the lower windshield section. This top has provisions for Back Roll Bars and are included. The roll bars also get screwed to the top and main body.

The Hard Top is secured with 6 M2 screws and the scale dash gets glued to the lower windshield section.

For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000, the rubbery type glue helps with impacts and is also great for magnets. 

We have a new CarbonFiber option we call "Carbon" this will have a slight increase in price, but a very high quality increase including higher temp and impact resistance. It also provides a textured matte finish, this can be painted with out prep, for a fine, scale "bed liner" type finish. 

Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved.

When choosing a color and planning to paint, you have options! You can choose the color based on what you would want to see when the paint gets scratched and character gets worked in. Orange, tan, and brown are good colors for showing rust and patina. Silver is the go to for metal or primer type scratches and wear. You can also pick the same color as your paint, so scratches will be less visible! 

Wait times vary depending on production load. Projected wait times are 1-2 weeks, but can get to the 3 week wait time. Thanks for your patience, and we appreciate your support.